Retail Security Options

If you do not have loss prevention security, then here are some options starting with the easiest, low cost deterrents to the more sophisticated full-fledged security system. You may click on the option you want to look at or just scan down to see all of your options.

 

1. Stop Shoplifting Security Kit
If you do not have much of a shoplifting problem, or you are just opening a store & do not think you will have much of a shoplifting problem, then consider using the "Stop Shoplifting Security Kit".

Stop Shoplifting for only $200 US Dollars! The Stop Shoplifting Security Kit contains 2,000 sensor security tags, 2,000 pins to attach them & 1 sensor security detacher. This gives the retailer the opportunity to present the look of full security with a minimal investment. When the shoplifter sees the tags, they will assume there is a system built into the walls or floors that they can not see. Not wanting to get caught stealing, they will generally shoplift elsewhere. If someone does remove a tagged product from your store they will have to rip a hole in the garment to get the tag off, thus eliminating the benefit of the use of the stolen item. Casual shoplifters, according to many studies, steal because it is convenient to do so & they do not feel they will get caught. Casual shoplifters constitute the major portion of shoplifters.

You might wonder how we can sell these security tags so cheap & are they real security tags. Yes, these previously owned security tags are real. They are from an older system and the frequency does not match any of the current security systems. These tags sold originally for .50 to .75 each when new. Recycled tags save you money. These tags were ment to be used over and over again. They will give you years of service.

To boost the realism of this method of stopping shoplifting, you might want to add a set of fake security pillars ($75 US Dollars per set of two). Some retailers have wired a night-light up through the fake pillars and plugged it in. The light that shows makes the fake system look like it is turned on thus adding more realism.

Another way to add to the effectiveness of your fake security system is to add an entrance mat that rings when someone enters. You can usually find these at any office supply store. If you are a smaller retailer, this will also help you to know when someone enters or leaves the store.

Easy Order Security Kit:

Includes 2000 recycled security tags with pins & 1 detacher $200

 

Additional detacher $50

 

Fake Security Pillar $99 (1 Tower)

 

---

2. Ink Tags
A highly effective system to help stop retail inventory loss due to shoplifting is the use of ink tags. Ink tags work well with any items that you can put a pin through (i.e. apparel). You may view a large variety of ink tags, backers & detachers by clicking to the left on the Ink Tag tab. You will want to order the same amount of ink tags & backers. If you order bubble back clutches, then you will use a magnetic detacher. If you use gray clutch backers, then you will want to order one of the Sensormatic detachers. It is always helpful if you have at least two detachers. You should have one attached to the counter next to each cash register. You should also have one for the back workroom. If you only have one detacher and it gets lost, then you will have a store full of tagged items that you can not sell until you get another detacher.

Easy Order Ink Tag Kit:

500 recycled ink tags, 500 backers & 2 detachers $325 US Dollars. We will select the type of ink tags & detachers for you. Order here and get 500 recycled ink tag warning labels FREE! (A $25 value)

 

Additional 500 ink tags with backers $225

 

---

3. The Vector Security System
The best method of protecting both your boxed goods & apparel products is a full security system. The Vector System for a single or double door is self-tuning & self-installing. This saves you the cost of installation normally charged by security companies (approximately $500). This system will detect both disposable paper labels (used on boxed goods) and hard plastic security tags (used on apparel items). The Vector System is a new system with up to date technology. It carries a 1-year warranty. For a single door entrance you place the system to one side of your door. For a double door entrance you place the single pillar system in the middle of the two doors. For an entrance wider than a double door please email us for a specialized quote. This system is compatible with all of the security items on the checkpoint tab. Our price for a single pillar is $1300 US Dollars.

 

 

Easy Order Complete Security System:

1 vector single pillar system $1350
1000 hard plastic security tags with pins (used) $300
2 manual security tag magnetic detachers $100
2000 disposable security paper labels $80
1 deactivation unit for check point paper labels $300
Total Package $2130 US Dollars

Order your complete security system here & get FREE FREIGHT (on this part of your order) anywhere in the continental USA.